LUPIT POLE - PRO SLOPE CEILING MOUNT

ADJUSTABLE 0-90 DEGREES

In Stock

LUPIT POLE SLOPE CEILING MOUNT PRO is used when the ceiling is not parallel to the floor and can be applied on any inclination.
It must be permanently fixed to the ceiling to provide maximum safety and stability of the pole when installed.

Since it is adjustable to any angle between 0 and 90 degrees, it can be used for any ceiling configuration or shape.

-
+

  • 129.99 €

FEATURES:

  • Stainless steel construction
  • LUPIT POLE SLOPE CEILING MOUNT PRO can be only used with LUPIT POLE PRO - the latest version
  • Mark the holes to be drilled on the ceiling.

LATEST UPDATES:

New environmental boxing.

Note:

Before purchasing, please make sure that you have measured the floor to ceiling height of where you would like to install the pole. This would help you avoid any frustration when coming to install the pole, as you will have the correct extensions (if necessary) to reach your desired height.
The pole is fully compatible with other PRO poles and can be ordered with LUPIT POLE QUICK LOCK™ (fast locking system) or in a standard configuration. For fast installation/removalof the poles the LUPIT POLE CART must be used.

Before drilling:

Make sure there is no installations (electricity, water, or gas lines) or other dangerous obstacles.
We recommend LUPIT POLE SLOPE CEILING MOUNT PRO to be installed only on the concrete ceiling. If the ceiling is made of any other material such as plaster, the construction should be checked by an expert and extra reinforced if needed.
Use all four holes to fix the LUPIT POLE SLOPE CEILING MOUNT PRO.
The position of the pole has to be exactly where the ceiling has been measured. The vertical distance is calculated from the middle point of the LUPIT POLE SLOPE CEILING MOUNT PRO vertically to the floor. 
By adjusting the position of the upper plate (it can be rotated) of the mount and the middle butterfly nut, set the lower plate of the mount to be in a horizontal position. Use water leveller.
When the lower plate is levelled, secure the position with the cable tie.
Use the LUPIT POLE PRO Instructions for use or Installation video for installation.
Be extra careful when installing the pole for the first time. Make sure you use the pole that is compatible with CEILING MOUNT PRO. The use of other poles could result in damage to the ceiling, it can loosen the LUPIT POLE SLOPE CEILING MOUNT PRO or the poles can be too short to ensure stability.
Before every pole exercise, check the stability of the pole by shaking it hardly.

Personal responsibillity:

This LUPIT pole product is provided as is without any guarantees or warranty. In association with the product, LUPIT pole makes no warranties of any kind, either express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, of title, or of noninfringement of third party rights. Use of the product by a user is at the user’s risk.
NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, OF MERCHANTABILITY, FITNESS FOR A SPECIFIC PURPOSE, THE LUPIT POLE PRODUCTS TO WHICH THE INFORMATION MENTIONS MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS, OR OF ANY OTHER NATURE ARE MADE WITH RESPECT TO INFORMATION OR THE LUPIT POLE PRODUCT TO WHICH INFORMATION MENTIONS. IN NO CASE SHALL THE INFORMATION BE CONSIDERED A PART OF OUR TERMS AND CONDITIONS OF SALE."


Shipping cost

Check out your shipping costs. 

All EU countries (except Malta, Cyprus, Iceland)24.99€
All Europe countries (except EU countries) with Malta, Cyprus, Iceland
39.99€
All world countries except Europe 
59.99€


There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
popup-logo

Complete solution for pole dance

Select continent

Newsletter

* E-Mail:

First Name:

Last Name: