Chrome plating usually consists of nickel as the base and a very thin layer of chrome as the finish. In this case, allergies to nickel may occur. On the other hand, stainless steel also contains nickel, but it is combined with steel and other elements to form a new metal. This means that fewer nickel particles come into contact with your skin. We can not assure you that you will not have an allergic reaction to stainless steel, although we have not received any reports of allergies on our poles so far.
Lupit Stage can be installed in 10-15 minutes depending on how skilled the person is. I would say that an average person can do the first installation in 25 minutes. The next time only 10-15 minutes.
Lupit Stage has all the needed tools included in the package.
I would like to explain how the extensions work with LP Stages. The pole on the stage consists of two parts. The lower part is always the same, while the extension can be different: The standard extension included in the package is 1445 mm. The stage extensions of 500 mm, 750 mm and 1000 mm must be ordered separately.
The standard configuration is set to a maximum total height of the stage of 2942 mm and can be mounted when the ceiling height is higher than 3050 mm. Since many people have lower ceilings, we have decided to offer shorter extensions:
--500 mm/ 1'7.6" ... for the minimum ceiling height of 2150 mm/7' 0.65''
--750 mm/ 2'5.53' ... for the minimum ceiling height of 2400 mm/7' 10.49''
--1000 mm/ 3'3.37" ... for the minimum ceiling height of 2650 mm/8' 8.33'
For safety/stability reasons, the extension cannot be ordered higher than 1445 mm. For the same reason, the mast extensions of our other products do not fit on the stage mast...it was designed that way on purpose.
Thank you for your message.
We will get back yo you shortly.