LUPIT POLE STAGE EXTENSION must be used with LUPIT POLE STAGE.
Extension 500 mm/ 19.68 in (recommended for ceiling heights over 2150 mm/ 84.65 in). With this extension, the total height of Lupit Stage is 1995 mm/ 78.54 in.
LP Stage with shorter extensions is often used indoors where the ceiling is lower than the standard height of the Lupit Stage STAGE.
Other solutions:
Extension 750 mm/ 29.53 in (for ceiling heights above 2400 mm/ 94.49 in). With this extension the total height of the Lupit Stage is 2245 mm/ 88.39in.
Extension 1000 mm/ 39.37 in (for ceilings higher than 2650 mm/ 104.33 in). With this extension, the total height of Lupit Stage is 2495 mm/ 98.23 in.
Features
- Extension 500 mm/ 19.68 in (for ceiling heights over 2150 mm/7'0.65'').
- Chrome
- EU origin
- 1445 mm standard extension (included in the package) for ceiling heights over 3050 mm (10' 0.08'')
| All EU countries (except Malta, Cyprus, Iceland) | 24.99€ |
| All European countries (except EU countries) with Malta, Cyprus, Iceland | 39.99€ |
| All world countries except Europe | 69.99€ |
| Slovenia | 9.99€ |
Note
Before purchasing, make sure you have measured the height from the floor to the ceiling in the place where you want to place the pole. The ceiling height must be at least 310 cm. This will avoid frustration when installing the pole, as you will have the correct extensions (if required) to reach the desired height.
Frequently asked questions
Chrome plating usually consists of nickel as the base and a very thin layer of chrome as the finish. In this case, allergies to nickel may occur. On the other hand, stainless steel also contains nickel, but it is combined with steel and other elements to form a new metal. This means that fewer nickel particles come into contact with your skin. We can not assure you that you will not have an allergic reaction to stainless steel, although we have not received any reports of allergies on our poles so far.
Lupit portable home poles can be installed in minutes depends on how skilled is the person. I would say that the average person can do the first installation in 15 min. The next time it will take only 5 minutes.
Lupit studio removable or permanent poles are usually installed by a skilled person. We would say that on average, a person can do first pole installation in 20 min but usually, there is more than one so the next pole can be installed in 10-15 min. It all depends on the ceiling, flooring material, and construction.
Lupit Stage can be installed in 10-15 minutes depends on how skilled is the person. I would say that the average person can do the first installation in 25 min. The next time only 10-15 minutes.
Lupit home poles have all the tools included except the water level and ladder.
Lupit Stage has all the tools needed to be included in the package to install the studio poles, you would need some common tools like an electric or cordless drill, screwdriver, water-level, ladder. The screws, allen key, and plastic inserts for the concrete are included in the package.
I would like to explain how the extensions work with LP Stages. The pole on the stage consists of two parts. The lower part is always the same, while the extension can be different: The standard extension included in the package is 1445 mm. The stage extensions of 500 mm, 750 mm and 1000 mm must be ordered separately.
The standard configuration is set to a maximum total height of the stage of 2942 mm and can be mounted when the ceiling height is higher than 3050 mm. Since many people have lower ceilings, we have decided to offer shorter extensions:
--500 mm/ 1'7.6" ... for the minimum ceiling height of 2150 mm/7' 0.65''
--750 mm/ 2'5.53' ... for the minimum ceiling height of 2400 mm/7' 10.49''
--1000 mm/ 3'3.37" ... for the minimum ceiling height of 2650 mm/8' 8.33'
For safety/stability reasons, the extension cannot be ordered higher than 1445 mm. For the same reason, the mast extensions of our other products do not fit on the stage mast...it was designed that way on purpose.
Lupit Stage can be installed in 10-15 minutes depending on how skilled the person is. I would say that an average person can do the first installation in 25 minutes. The next time only 10-15 minutes.
